NEO-M9N four GNSS receiver with SMA antenna connectors for your UAV systems, Robots, RC, FPV or other projects. Ultra small and light. 7075 Alluminium IP67 case.
The NEO-M9N USB C receiver makes evaluating the high performance of the u-blox 9 positioning engine simple. With a built-in USB interface for both power supply and high-speed data transfer, the need for an external power supply is eliminated.
The NEO-M9N receiverd is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations.
Furthermore, the NEO-M9N receiver can be used with a Tablet or a notebook PC, making it the perfect companion through all stages of design-in projects. It’s a fully assembled and tested receiver NEO-M9N with SMA antenna connectors.
NEO-M9N FOUR-CHANNEL GNSS IP67 USB-C DONGLE RECEIVER
- 92-channel u-blox M9 engine GPS L1 C/A, QZSS L1 C/A/S, GLONASS L1OF BeiDou B1I (1561.098 MHz) only, Galileo E1B/C SBAS L1 C/A: WAAS, EGNOS, MSAS, GAGAN
- Nav. update rate Up to 50 Hz (4 concurrent GNSS)
- Position accuracy 1.5 m CEP (with SBAS) or 2.0 m CEP (without SBAS)
- UDR position error 10% of distance traveled without GNSS (duration < 60 s)
- ADR position error 2% of distance traveled without GNSS
- Acquisition
- Cold starts: 24 s
- Aided cold starts: 2 s
- Reacquisition: 2 s
- Sensitivity Tracking & Nav: –160 dBm
- Reacquisition –159 dBm
- Cold starts (aided): –148 dBm
- Hot starts: –158 dBm
- Geofencing Up to 4 circular areas Software message or GPIO for waking up the host CPU
- RF interference and jamming detection and reporting
- Active GNSS in-band filtering
- Active GNSS in-band filtering Spoofing detection and reporting (consistency checks based on GNSS and sensors)
- Device integrity Secure boot of firmware Receiver configuration lock by command
- Secure interface Signed UBX messages (SHA-256) JTAG debug interface port locked
- Assistance GNSS AssistNow Online
- Active and passive Supported antennas