NEO-M9N four GNSS Smart Antenna module with UART/SPI and SMA antenna connectors in the black plastic case for your UAV systems, Robots, RC, FPV or other projects.
Ultra small and light. Designed to use together with recommended Helix antenna. The NEO-M9N Smart Antenna module makes evaluating the high performance of the u-blox 9 positioning engine simple. The NEO-M9N Smart Antenna module is very compact, and it’s user-friendly interface and power supply options make it ideally suited for use in laboratories, vehicles and outdoor locations. It’s a fully assembled and tested module for the NEO-M9N with SMA antenna connectors.
NEO-M9N GNSS SMART ANTENNA MODULE W/ UART/SPI, BLACK PLASTIC CASE
SKU: DNT-EL0172
From $120.25Price
- 92-channel u-blox M9 engine GPS L1 C/A, QZSS L1 C/A/S, GLONASS L1OF BeiDou B1I (1561.098 MHz) only, Galileo E1B/C SBAS L1 C/A: WAAS, EGNOS, MSAS, GAGAN
- Nav. update rate Up to 50 Hz (4 concurrent GNSS)
- Position accuracy 1.5 m CEP (with SBAS) or 2.0 m CEP (without SBAS)
- UDR position error 10% of distance traveled without GNSS (duration < 60 s)
- ADR position error 2% of distance traveled without GNSS
- Acquisition
- Cold starts: 24 s
- Aided cold starts: 2 s
- Reacquisition: 2 s
- Sensitivity Tracking & Nav: –160 dBm
- Reacquisition –159 dBm
- Cold starts (aided): –148 dBm
- Hot starts: –158 dBm
- Geofencing Up to 4 circular areas Software message or GPIO for waking up the host CPU
- RF interference and jamming detection and reporting
- Active GNSS in-band filtering
- Active GNSS in-band filtering Spoofing detection and reporting (consistency checks based on GNSS and sensors)
- Device integrity Secure boot of firmware Receiver configuration lock by command
- Secure interface Signed UBX messages (SHA-256) JTAG debug interface port locked
- Assistance GNSS AssistNow Online
- Active and passive Supported antennas